1- Tile must have 90 degree at all four corners
2- No rust color should be in the color of the stone
3- No pores should be in the filling of the stone
4- No rust colors should be in the pours of the stone in the back
5- The filling should be filled with hard resin material that will not flake and no cement filling is acceptable
6- The cit on the sides should be perfectly perpendicularly cut and no slope is acceptable
7- The thickness of the tile should be in inches
8- The color variation of the lot of the tile should be as close as possible without noticing the color variation and consistency
9- The tile should measure (18 inch x 18 inch)
10- The cut of the block should be cross vain cut and not straight cut
11- The crates should be build from strong wood pallets and to the specs needed for stacking and fork lift use
12- The face of the tile should show from both sides of the crate
13- The tiles should be packed in a special way where the face of the finished tile will be facing fork lift use
14- Their should be Styrofoam on the bottom of crate and side of tiles for protection.
Copyright 2003 WholesaleTravertine.com. All rights reserved.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
